IIA-CIA-Part3認証試験、IIA-CIA-Part3受験
だれでも成功したいのです。IT業界で働いているあなたはIIAのIIA-CIA-Part3認証試験の重要性を知っているのでしょう。IIAのIIA-CIA-Part3認証試験に参加する人はますます多くなっています。競争がこのように激しい情況で勝つためにどうしますか。ふさわしいアシスタントを選ぶのは一番重要なのです。JapanCertはIIAのIIA-CIA-Part3認証試験を長い時間で研究しますので、この試験を深く了解しています。我々提供するIIAのIIA-CIA-Part3認証試験ソフトであなたはきっと試験に合格できます。
進歩を勇敢に追及する人生こそ素晴らしい人生です。未来のある日、椅子で休むとき、自分の人生を思い出したときに笑顔が出たら成功な人生になります。あなたは成功な人生がほしいですか。そうしたいのなら、速くJapanCertのIIAのIIA-CIA-Part3認証試験を利用してください。これはIT認証試験を受ける皆さんのために特別に研究されたもので、１００パーセントの合格率を保証できますから、躊躇わずに購入しましょう。
試験番号：IIA-CIA-Part3 資格試験
試験科目：「Certified Internal Auditor - Part 3, Business Analysis and Information Technology」
最近更新時間：2016-10-11
問題と解答：1554
試験科目：「Certified Internal Auditor - Part 3, Business Analysis and Information Technology」
最近更新時間：2016-10-11
問題と解答：1554
IIAのIIA-CIA-Part3認証試験は現在で本当に人気がある試験ですね。まだこの試験の認定資格を取っていないあなたも試験を受ける予定があるのでしょうか。確かに、これは困難な試験です。しかし、難しいといっても、高い点数を取って楽に試験に合格できないというわけではないです。では、まだ試験に合格するショートカットがわからないあなたは、受験のテクニックを知りたいですか。今教えてあげますよ。JapanCertのIIA-CIA-Part3認証試験を利用することです。
NO.1 The use of teams in total quality management (TQM) is important because:
A. Teams are quicker to make decisions, thereby helping to reduce cycle time.
B. Employee motivation is higher for team members than for individual contributors.
C. The use of teams eliminates the need for supervision, thereby allowing a company to become
leaner and more profitable.
D. Well-managed teams can be highly creative and are able to address complex problems better
than individuals can.
Answer: D
IIA-CIA-Part3ソフト版
Explanation:
Teams can use the diverse knowledge and skills of all team members. Employee involvement means
training and empowering employees to harness their creativity for problem solving. Quality control
circles are used to obtain input from employees and to locate the best perspective on problem
solving.
NO.2 All of the following are generally included in a cost-of-quality report except:
A. Explanation:
External failure costs arise when problems occur after delivery. They occur because products or
services are nonconforming or otherwise do not satisfy customers. External failure costs in service
enterprises are even more important than in manufacturing environments. Faulty goods sometimes
maybe reworked or replaced to a customer's satisfaction, but poor service tends to result in a loss of
customers.
16. A means of limiting production delays caused by equipment breakdown and repair is to:
A. Schedule production based on capacity planning.
B. Plan maintenance activity based on an analysis of equipment repair work orders.
C. Pre-authorize equipment maintenance and overtime pay.
D. Establish a preventive maintenance program for all production equipment.
B. Explanation:
One of the principles of total quality management (TQM) is customer orientation, whether the
customer is internal or external. An internal customer is a member of the organization who relies on
another member's work to accomplish his/her task.
14. Management of a company is attempting to build a reputation as a world-class manufacturer
of quality products. Which of the following measures would not be used by the firm to measure
quality?
A. The percentage of shipments returned by customers because of poor quality.
B. The number of parts shipped per day.
C. The number of defective parts per million.
D. The percentage of products passing quality tests the firsttime
C. Warranty claims.
D. Explanation:
TQM emphasizes satisfaction of customers, both internal and external. TQM considers the supplier's
relationship with the customer, identifies customer needs, and recognizes that everyone in a
process is at some time a customer or supplier of someone else, either inside or outside of the
organization. Thus, TQM begins with external customer requirements, identifies internal
customer-supplier relationships and requirements, and establishes requirements for external
suppliers.
19. The four categories of costs associated with product quality costs are:
A. External failure, internal failure, prevention, and carrying.
B. External failure, internal failure, prevention, and appraisal.
C. External failure, internal failure, training, and appraisal.
D. Warranty, product liability, training, and appraisal.
E. Design engineering.
F. Explanation:
TQM emphasizes quality as a basic organizational function. TQM is the continuous pursuit of quality
in every aspect of organizational activities. One of the basic principles of TQM is doing it right the
first time. Thus, errors should be caught and corrected at the source.
18. Which of the following is a key to successful total quality management (TQM)?
A. Training quality inspectors.
B. Focusing intensely on the customer.
C. Creating appropriate hierarchies to increase efficiency.
D. Establishing a well-defined quality standard, then focusing on meeting it.
G. Explanation:
The number of parts shipped per day would most likely be used as a measure of the effectiveness
and efficiency of shipping procedures, not the quality of the product. This measure does not
consider how many of the parts are defective.
15. Quality costing is similar in service and manufacturing organizations. Nevertheless, the
differences
between these organizations have certain implications for quality management. Thus,
A. Direct labor costs are usually a higher percentage of total costs in manufacturing organizations.
B. External failure costs are relatively greater in service organizations.
C. Quality improvements resulting in more efficient use of labor time are more likely to be accepted
by employees in service organizations.
D. Poor service is less likely to result in loss of customers than a faulty product.
H. Explanation:
A preventive maintenance program reduces equipment breakdowns and repairs.
17. Under a total quality management (TQM) approach,
A. Measurement occurs throughout the process, and errors are caught and corrected at the source.
B. Quality control is performed by highly trained inspectors at the end of the production process.
C. Upper management assumes the primary responsibility for the quality of the products and
services.
D. A large number of suppliers are used in order to obtain the lowest possible prices.
I. Explanation:
TQM promotes teamwork by modifying or eliminating traditional (and rigid) vertical hierarchies and
instead forming flexible groups of specialists. Quality circles, cross-functional teams, and
self-managed teams are typical formats. Teams are an excellent means of encouraging the sharing
of ideas and removing process improvement obstacles.
13. If a company is customer-centered, its customers are defined as:
A. Only people external to the company who have purchased something from the company.
B. Only people internal to the company who directly use its product.
C. Anyone external to the company and those internal who rely on its product to get their job done.
D. Everybody external to the company who is currently doing, or may in the future do, business with
the company.
J. Explanation:
Emphasizing lower input costs may result in more defective output, and higher input costs may or
may not reflect the procurement of better raw materials. Financial measures are thus mostly
unsuitable for measuring quality.
12. One of the main reasons that implementation of a total quality management (TQM) program
works better through the use of teams is:
A. Teams are more efficient and help an organization reduce its staffing.
B. Employee motivation is always higher for team members than for individual contributors.
C. Teams are a natural vehicle for sharing ideas, which leads to process improvement.
D. The use of teams eliminates the need for supervision, thereby allowing a company to reduce
staffing.
K. Supplier evaluations.
L. Lost contribution margin.
M. Explanation:
Prevention costs are incurred to prevent defects. Appraisal costs are incurred to detect defective
output during and after the production process. Internal failure costs are associated with defective
output discovered before shipping. External failure costs are associated with defective output
discovered after it has reached the customer.
20. Statistical quality control often involves the use of control charts whose basic purpose is to:
A. Determine when accounting control procedures are not working.
B. Control labor costs in production operations.
C. Detect performance trends away from normal operations.
D. Monitor internal control applications of information technology.
N. Explanation:
A cost-of-quality report includes most costs related to quality, specifically the costs of prevention,
appraisal, internal failure, and external failure.
11. Which of the following is not an appropriate measure of quality?
A. Market share.
B. Delivery performance.
C. Customer satisfaction.
D. Raw materials costs.
Answer: A,B,D,F,G,H,I,J,L,M,N
IIA-CIA-Part3日本語サンプル IIA-CIA-Part3試験問題解説集
Explanation:
Statistical control charts are graphic aids for monitoring the status of any process subject to random
variations. The chart consists of three horizontal lines plotted on a horizontal time scale. The vertical
scale represents the appropriate quantitative measure. The center line represents the average range
or overall mean for the process being controlled. The other two lines are the upper control limit and
the lower control limit. The processes are measured periodically, and the values are plotted on the
chart. If the value falls within the control limits, no action is taken. If the value falls outside the limits,
the process is considered "out of control," and an investigation is made for possible corrective
action. Another advantage of the chart is that it makes trends visible.
NO.3 Which of the following costs of quality is a failure cost?
A. Costs of inspecting in-process items.
B. Systems development costs.
C. Costs of quality circles.
D. Contract penalty for delivery of nonconforming goods.
Answer: D
IIA-CIA-Part3暗記カード IIA-CIA-Part3受験期
Explanation:
Failure costs are incurred after defective output has been removed from production. A contract
penalty for faulty goods is an example of an external failure cost.
NO.4 Which statement best describes total quality management (TQM)?
A. TQM emphasizes encouraging cross-functional teamwork.
B. TQM emphasizes reducing the cost of inspection.
C. TQM emphasizes better statistical quality control techniques.
D. TQM emphasizes doing each job right the first time.
Answer: D
IIA-CIA-Part3問題集無料 IIA-CIA-Part3無料更新
Explanation:
TQM establishes quality as an organizational objective and views it as a major component of the
organization's service to its customers. It emphasizes employee training and commitment,
productservice design and production, and customer service. Ordinarily, the quality of a product or
service is as important to customers as cost and timeliness. Superior product quality is not merely
the result of more inspection, better statistical quality control, and cross-functional teamwork.
Manufactures must make fundamental changes in the way they produce products and do each job
right the first time.
JapanCertは最新の210-065問題集と高品質の070-346問題と回答を提供します。JapanCertのHP0-S42 VCEテストエンジンと70-413試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の070-462 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
記事のリンク：http://www.japancert.com/IIA-CIA-Part3.html
